Primary Metals
Process efficiency, safe operations and automation are the cornerstone of profitability in the primary metals industry.
Engineering Expertise
We offer one point of contact to assist with short or long term project planning. Our experienced team can lower the cost and offers a higher ROI in key areas such as design, materials, lubrication, and maintenance.
Reliability
With unscheduled downtime costing 10’s to 100’s of thousands of dollars, reliable products are a must in the harsh environments of metals industry. With more than 100 years’ experience in providing harden solutions to customer’s requirements, you can be assured that dependability is built into every motor, coupling and spindle.

Talk to one of our expert sales professionals to learn more about how our solutions can improve your business.
Primary Metals Solutions

Primary Metals Solution
A Michigan-based steel manufacturing facility installed a new reducer on one of its roughing mills due to damage within the existing reducer. The mill was concerned that the loads being transmitted through the gear reducer may be exceeding design limits.
Learn More
Cold Mill Shaft Solution
In many cases, rolling stands are subject to frequent mechanical failures and motor problems causing unplanned downtime and expensive repairs. By installing strain gage telemetry systems on gear spindles, actual torque measurements can be collected.
Learn MorePrimary Metals Related Videos


Jaure and Kop-Flex Couplings and services for Metals R3
Jaure® and Kop-Flex® couplings and services for metals
Kop-Flex® HP Coupling Recertification Program
Kop-Flex High Performance Couplings can be repaired and recertified for continued reliable service in API-671 applications. Receive a renewed warranty at a price typically for 40-50% of a new one.
Perceptiv™ Using Augmented Reality
Perceptiv™ Leverages the Power of Augmented Reality
Primary Metals Products
Primary Metals Literature Training
- NEMA® MG1-2006
- EISA/NEMA Premium®
- Underwriters Laboratories
- Canadian Standards Association
- CE Mark
Nema is believed to be the trademark and/or trade name of National Electrical Manufacturers Association and is not owned or controlled by Regal Rexnord Corporation.
Primary Metals Reference List
Regal manufactures high quality motors, control and power transmission products for a myriad of industries and applications: from high efficiency severe duty, pump and roller table motors to medium voltage. Our drives and controls are “Performance Matched” to operate seamlessly with our motors. The reliability of our power transmission products guarantees years of trouble free performance in the most demanding applications.
Motor Types | Balers | Blowers | Conveyors | Cranes | Extruders | Fans | Material Handling | Pollution Control | Pumps | Shaker Tables | Rolling Mills |
---|---|---|---|---|---|---|---|---|---|---|---|
Brakemotors | • | • | • | • | |||||||
Fractional | • | • | • | • | • | • | • | • | • | ||
Gearmotors - AC | • | • | • | • | |||||||
IEC | • | • | • | • | • | • | • | • | • | • | |
Integral Horsepower | • | • | • | • | • | • | • | • | • | • | |
Medium Voltage | • | • | • | • | |||||||
Pump | • | ||||||||||
Roller Table | • | ||||||||||
Shaker Table | • | ||||||||||
Variable Speed | • | • | • | • | • | • | • | • | • | • | • |
AC Drives | Balers | Blowers | Conveyors | Cranes | Extruders | Fans | Material Handling | Pollution Control | Pumps | Shaker Tables | Rolling Mills |
---|---|---|---|---|---|---|---|---|---|---|---|
AC Drives | • | • | • | • | • | • | • | • | • | • | • |
Power Transmission | Balers | Blowers | Conveyors | Cranes | Extruders | Fans | Material Handling | Pollution Control | Pumps | Shaker Tables | Rolling Mills |
---|---|---|---|---|---|---|---|---|---|---|---|
Bearings | • | • | • | • | |||||||
Belt Drives | • | • | • | ||||||||
Chain | • | • | • | ||||||||
Conveyor Components | • | ||||||||||
Couplings | • | • | • | • | • | • | • | • | • | • | • |
Gear Reducers | • | • | • | • | • | • | |||||
Mounted Bearings | • | • | • | • | • | • | • | • | |||
Pulleys | • | • | • |
Segment Analysis
United States Industry Overview
The primary metals industry has endured exceptionally difficult operating conditions over the five years since 2017.
Industrial Production Index
The industrial production index measures output from the mining, manufacturing, electric and gas sectors. Industrial production is closely linked to demand for primary metals because it is used in a variety of industrial applications, from machinery manufacturing to oil pipelines.
Iron & Steel Industry
Operators in the iron and steel manufacturing industry melt and refine iron ore into iron, which is subsequently processed into steel. Companies manufacture steel into a variety of shapes, such as bars, plates, rods, sheets, strips and wire, for downstream construction and manufacturing industries. Operators typically alloy, or mix, steel with nonferrous metals, such as nickel and zinc, to impart certain properties to the final product. For instance, industry participants use nickel in the production of stainless steel, which is more resistant to corrosion and better able to withstand extreme temperatures. Similarly, operators use zinc to galvanize steel products and prevent them from rusting
Aluminum Industry
The aluminum manufacturing industry includes companies that refine aluminum-bearing bauxite into alumina and smelt alumina to produce aluminum. Industry operators also recycle aluminum from scrap metal, which is a less energy intensive process known as secondary aluminum production. The industry also includes a wide range of both vertically integrated and standalone manufacturers that process unwrought aluminum (typically purchased from upstream manufacturers but also produced internally) into intermediary and value added products such as plate, sheet, foil and extrusions for downstream manufacturing and construction markets. Aluminum is a lightweight, ductile, corrosion-resistant, highly conductive and infinitely recyclable material, making it particularly useful in an array of applications. Accordingly, aluminum products are used as inputs in automotive and aerospace structural components, electrical machinery and parts, packaging materials, nonresidential construction and a wide range of other applications.
SOURCE: WWW.IBISWORLD.COM

Association
