Grove Gear GR Series - Ironman Worm Gear Reducers Cast Iron Single-Reduction Worm Reducer - GR-BMQ824-10-L-180
This product complies with the standards of the country you selected.
Sorry, at this time this product does not comply with the standards of the country you selected.
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input HP:||3.564||No. of Gear Reductions:||Single|
|Frame Size:||180TC||Reducer Style:||Worm - Right Angle|
|Series Type:||Cast Iron 800 Worm Gear Reducers||Output HP:||3.253|
|Input RPM:||1,750||Series Style:||GR-BMQ-L|
|Output Key:||1/4 X 1.75||Output RPM:||175|
|Keyway:||1/4 x 1/8||Output Shaft Assembly Code:||L|
|Input Style:||C-Face Quill||Series Code:||GR|
|Overhung Load:||1,770||Output Shaft Orientation:||L|
|Output Style:||L||Mounting Style:||Base|
|Input Keyway (C Face):||1/4 x 1/8||Input Quill Diameter (in):||1.125 in|
|Ratio:||10:1||Series:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||10:1||Product Type:||Right Angle|
|Reducer:||Worm - Right Angle||Thrust Rating - output shaft:||1820|
|Input Diameter (in):||1.125 in||Service Factor:||1|
|Shaft Seal Material:||Viton||Input HP @ 1750 RPM:||3.564|
|Motor Frame Size:||180||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||BMQ824||Center Distance (in):||2.38|
|Output Diameter (in):||1.125 in||Input Bore (C Face):||1.125|
|Reduction:||Single||Output Shaft Direction:||Left|
|Output Torque Rating (in-lb):||1172 in/lbs||Overhung Load Rating (Output Shaft(lb)):||1,770 lb|
|Housing Material:||Cast Iron||Output Shaft:||Solid Shaft|