Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-HMQ821-60-H1-48-16
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Output Style:||H1||Model Code:||HMQ821|
|Bore Code:||16||Overhung Load:||1,415|
|Output Torque:||940||Input Bore (C Face):||0.5|
|Input HP:||0.674||Output shaft:||Hollow Bore|
|Input RPM:||1,750||HP Range:||1/2 to 3/4 HP (< 1)|
|Output Torque Range:||500 to 1000 in lbs||Mounting Style:||Shaft Mount|
|Output Hollow Shaft Diameter (in):||1.000 in||Assembly:||HMQ-H1|
|Output HP:||0.435||Gear Type:||Worm|
|Service Factor:||1||Input Keyway (C Face):||1/8 x 1/16|
|Frame Size:||48||Gear Drive Reductions:||Single|
|Input Diameter (in):||0.5 in||Output Shaft Assembly Code:||H1|
|Product Type:||Right Angle||Center Distance Range:||1" thru 3.25"|
|Output Shaft Orientation:||H1||Ratio:||60:1|
|Shaft Seal Material:||Viton||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Ratio Range:||60:1||Housing material:||Cast Iron|
|Output RPM:||29||Input Style:||C-face Quill|
|Series:||GR Series - Ironman Worm Gear Reducers||No. of Gear Reductions:||Single|
|Reducer Style:||Worm - Right Angle||Center distance (inch):||2.06|
|Series Style:||GRL-HMQ-H1||Output Key:||1/4 X 2.50|