Grove Gear Cast Iron Single-Reduction Worm Reducer - GRL-HMQ821-60-H1-48-20
- One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
- Factory-filled with premium Mobil Glygoyle 460 polyalkalene glycol lubricant.
- Large oil capacity provides positive splash lubrication and superior cooling capability.
- Viton® double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals.
- The unique quill seal guard protects the input seal from damage during motor installation.
- Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
- Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.Tapered roller bearings on output shaft for high overhung and thrust load capacities.
- All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
- Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
- Mounting dimensions are interchangeable with most industry standard reducers.
|Input Bore (C Face):||0.5||Product Type:||Right Angle|
|Output RPM:||29||Mounting Style:||Shaft Mount|
|Output Torque Range:||500 to 1000 in lbs||Output Style:||H1|
|Frame Size:||48||Shaft Seal Material:||Viton|
|Series:||GR Series - Ironman Worm Gear Reducers||Input RPM:||1,750|
|Reducer Style:||Worm - Right Angle||Service Factor:||1|
|Output Key:||1/4 X 2.50||Output Hollow Shaft Diameter (in):||1.250 in|
|Output Shaft Orientation:||H1||Center distance (inch):||2.06|
|Bore Code:||20||Housing material:||Cast Iron|
|Gear Drive Reductions:||Single||Input HP:||0.674|
|Output Shaft Assembly Code:||H1||Ratio Range:||60:1|
|Input Diameter (in):||0.5 in||Output Torque:||940|
|Input Keyway (C Face):||1/8 x 1/16||Product Line:||GR Series - Ironman Worm Gear Reducers|
|Model Code:||HMQ821||Output shaft:||Hollow Bore|
|Center Distance Range:||1" thru 3.25"||HP Range:||1/2 to 3/4 HP (< 1)|
|Overhung Load:||1,415||Input Style:||C-face Quill|
|Series Style:||GRL-HMQ-H1||Gear Type:||Worm|
|No. of Gear Reductions:||Single||Output HP:||0.435|